BINNEY AND SMITH INC -- 112 LIQUITEX ARTIST ACRYLIC COLORS IN TUBES & JARS  -- 8010-00F006097
<pre>=====================  Product Identification  =====================

Product ID:112 LIQUITEX ARTIST ACRYLIC COLORS IN TUBES & JARS
MSDS Date:04/23/1992
FSC:8010
NIIN:00F006097
=== Responsible Party ===
Company Name:BINNEY AND SMITH INC
Address:1100 CHURCH LANE
Box:431
City:EASTON
State:PA
ZIP:18044-9010
Country:US
Info Phone Num:800-272-9652
Emergency Phone Num:800-272-9652/215-253-6271
Preparer's Name:PHILLIP E MOLL
CAGE:EO269
=== Contractor Identification ===
Company Name:BINNEY & SMITH INC
Address:1100 CHURCH LANE
Box:City:EASTON
State:PA
ZIP:18044
Country:US
Phone:800-272-9652
CAGE:85419
Company Name:BINNEY AND SMITH INC
Address:1100 CHURCH LANE
Box:431
City:EASTON
State:PA
ZIP:18044
Country:US
Phone:800-272-9652
CAGE:EO269

=============  Composition/Information on Ingredients  =============

Ingred Name:1,2-PROPANEDIOL (PROPYLENE GLYCOL)
CAS:57-55-6
RTECS #:TY2000000

Ingred Name:2-AMINO-2-METHYL-1-PROPANOL
CAS:124-68-5
RTECS #:UA5950000

Ingred Name:VOLATILE ORGANIC COMPOUNDS: COATING LESS WATER 1-1.5
    LBS/GAL
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE &
    RESPIRATORY DISORDERS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WIPE OFF EXCESS &
    FLUSH W/WARM WATER & SOAP. INHALATION: REMOVE TO FRESH AIR & TREAT
    SYMPTOMATICALLY. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:>250F
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP UP FOR USE/DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE NEAR EXTREME HEAT. USE
    W/ADEQUATE VENTILATION.
Other Precautions:DON'T INHALE DUST/SPRAY FROM AIRBRUSH.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH CERTIFIED RESPIRATOR FOR LARGE
    QUANTITIES OF PAINT, AIRBRUSHING & SANDING DRIED PRODUCT.
Ventilation:ADEQUATE TO CONTROL FUMES, VAPOR & DUST CONCENTRATIONS.
Eye Protection:SAFETY GLASSES/GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F
Melt/Freeze Pt:M.P/F.P Text:<32F
Vapor Pres:17-20
Vapor Density:>1
Spec Gravity:1.1-1.6
Evaporation Rate &amp; Reference:(BU AC = 1): <1
Solubility in Water:DISPERSES
Appearance and Odor:VISCOUS COLORED LIQUID W/SLIGHT ACRYLATE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:CO & CO2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.