BORDEN -- KRYLON RUST MAGIC INT/EXT ENAMEL, 6220-6270 -- 8010-00N059167 
=====================  Product Identification  =====================

Product ID:KRYLON RUST MAGIC INT/EXT ENAMEL, 6220-6270
MSDS Date:06/30/1986
FSC:8010
NIIN:00N059167
=== Responsible Party ===
Company Name:BORDEN
Address:180 EAST BROAD ST
City:COLUMBUS
State:OH
ZIP:43215
Country:US
Info Phone Num:800-848-9400; 614-431-6680
Emergency Phone Num:800-848-9400
CAGE:9P972
=== Contractor Identification ===
Company Name:ARABOL DEPT BORDEN CHEMICAL DIV OF BORDEN INC
Address:180 E BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:84163
Company Name:BORDEN,INC. PACKAGING AND INDUSTRIAL PRODUCTS DIVISION
Address:180 EAST BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215
Country:US
Phone:614-431-6600/800-848-9400
CAGE:9P972

=============  Composition/Information on Ingredients  =============

Ingred Name:LIGROINE; (VM&P NAPHTHA)
CAS:8032-32-4
RTECS #:OI6180000
Fraction by Wt: 0.8-3%
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Ingred Name:BARIUM METABORATE; (BARIUM BORATE (BAB*2O*4))
CAS:13701-59-2
RTECS #:CQ9570000
Fraction by Wt: 0.5-1.6%
OSHA PEL:0.5 MG/M3 (BA) (MFR)
ACGIH TLV:0.5 MG/M3 (BA) (MFR)

Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED; (HYDROTREATED LIGHT
    DISTILLATE (PETROLEUM))
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 29-53%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:N/K 

Ingred Name:SUPDAT:PRACTICES. THESE TECHNIQUES MAY NOT NEC ADDRESS ALL
    ISSUES PERTAINING TO YOUR OPERATIONS. MFR, THEREFORE, (ING 5)
RTECS #:9999999ZZ

Ingred Name:ING 4:RECOMMENDS THAT YOU CONSULT W/EXPERTS OF YOUR CHOICE
    TO DETERMINE WHETHER OR NOT YOUR PROGRAMS ARE ADEQUATE.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN ABSORPTION:NO HAZARDS KNOWN
    TO MFR. INGEST:MAY BE HARMFUL IF SWALLOWED. INHAL:MAY BE HARMFUL.
    LIQUID OR VAPOR CAN CAUSE IRRITATION OF NOSE, THROAT & LUNGS.
    SKIN:MAY CAUSE IRRITATION ON PROL ONGED OR REPEATED CONTACT.
    EYES:CAUSES IRRITATION. ING 3:OVEREXPOSURE MAY CAUSE KIDNEY DAMAGE
    BASED ON (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:TEST W/LAB ANIMALS. INGS 1 & 3:CAN
    CAUSE CNS DEPRESSION. SIGNS & SYMPTOMS MAY INCLUDE HEADACHE,
    DIZZINESS, NAUSEA, VOMITING, UNCONSCIOUSNESS & EVEN ASPHYXIATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:DO NOT INDUCE VOMIT. CALL MD IMMED. INHAL:REMOVE TO
    FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP, PREF MOUTH-TO-MOUTH. IF
    BRTHG IS DFCLT, GIVE OXYGEN. CALL MD. SKIN:FLUSH W/WATER. EYE:IMMED
    FLUSH W/ PLENTY OF WATER FOR AT LST 15 MINS. EYELIDS SHOULD BE HELD
    APART DURING IRRIGATION TO INSURE WATER CONTACT W/ENTIRE SURFACE OF
    EYES & LIDS. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:102F,39C
Lower Limits:0.7%
Extinguishing Media:IN CASE OF FIRE, USE DRY CHEMICAL, FOAM OR CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WATER MAY BE INEFFECTIVE, BUT SHOULD BE USED TO KEEP
    FIRE EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:COMBUSTIBLE. KEEP AWAY FROM HEAT & FLAME.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP
    W/ABSORBENT MATERIAL & REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
    ENTRY INTO NATURAL BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES >120F.
    AVOID BREATHING VAPOR. USE W/ADEQUATE VENTILATION. AVOID PROLONGED
    OR REPEATED CONTACT W/SKIN. AVOID CONT W/EYES.
Other Precautions:COMBUSTIBLE. INSTRUCT YOUR WORKERS TO HANDLE THIS
    PROD PROPERLY. HANDLE I/A/W GOOD INDUS HYGIENE & SAFETY PRACTICES.
    THESE PRACTICES INCL AVOIDING UNNEC EXPOS & REMOVAL OF MATL FROM
    EYES, SKIN & CLTHG .

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE AIR CONTAMS CAN EXCEED ACCEPT CRITERIA,
    USE NIOSH/MSHA APPRVD RESP PROT EQUIP. RESPS SHOULD BE SELECTED
    BASED ON FORM & CONC OF CONTAMS IN AIR & I/A/W OSHA 29 CFR 1910.134
    OR OTHER APPLIC STDS/G UIDELINES.
Ventilation:IF AIRBORNE CONTAMS ARE GENERATED WHEN MATL IS
    HEATED/HNDLD, SUFFICIENT VENT IN VOL & AIR FLOW PATTERNS SHOULD
    (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
VENT:BE PROVIDED TO KEEP AIR CONTAM CONC LEVELS BELOW ACCEPT CRITERIA.
    ENGINEERING CONTROLS: FOLLOWING EXPOS CONTROL TECHNIQUES MAY BE
    USED TO EFTIVELY MIN EMPLOYEE EXPOS: LOC EXHST VENT, ENCLSD SYS D
    ESIGN, PROCESS ISOLATION & REMOTE CONTROL IN COMBINATION W/APPROP
    USE OF PERSONAL PROT EQUIP & PRUDENT WORK (ING 4)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>280F,>138C
Vapor Density:HVR/AIR
Spec Gravity:LTR/WATER
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:SLIGHT
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:49-61

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RECOVER FREE LIQUID, ABSORB RESIDUE & DISPOSE OF
    ACCORDING TO LOCAL, STATE & FEDERAL REQUIREMENTS. EMPTY CONTAINER:
    MAY CONTAIN EXPLOSIVE VAPORS. DO NOT CUT, PUNCTURE OR WELD ON OR
    NEARBY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.